Socket welded pipe fittings(一)
GB/T 14383、HGJ10、SHJ410、ASME B16.11、JIS B2316
Socket welding pipe fittings
Nominal diameter DN(in) | Depth of socket | Wall thickness | Center to bottom of socket | ||||||||
A | |||||||||||
Cmin | 90°Elbow、Tee、Cross | 45°Elbow | |||||||||
A | B(in) | Jmin | 3000 Sch80 | 6000 Schl60 | 9000 XXS | 3000 Sch80 | 6000 Schl60 | 9000 XXS | 3000 Sch80 | 6000 Schl60 | 9000 XXS |
6 | 1/8 | 10 | 3.2 | 4.0 | - | 11 | 11 | - | 8 | 8 | - |
8 | 1/4 | 10 | 3.8 | 4.6 | - | 11 | 14 | - | 8 | 8 | - |
10 | 3/8 | 10 | 4.0 | 5.1 | - | 14 | 16 | - | 8 | 11 | - |
15 | 1/2 | 10 | 4.5 | 5.6 | 9.4 | 16 | 19 | 25 | 11 | 13 | 16 |
20 | 3/4 | 13 | 5.0 | 7.0 | 9.8 | 19 | 22 | 29 | 13 | 14 | 19 |
25 | 1 | 13 | 5.6 | 7.9 | 11.4 | 22 | 27 | 32 | 14 | 18 | 21 |
32 | 11/4 | 13 | 6.3 | 7.9 | 12.2 | 27 | 32 | 35 | 18 | 21 | 22 |
40 | 11/2 | 13 | 6.3 | 8.9 | 12.7 | 32 | 38 | 38 | 21 | 25 | 25 |
50 | 2 | 16 | 7.0 | 11.0 | 13.9 | 38 | 41 | 54 | 25 | 29 | 29 |
65 | 21/2 | 16 | 8.9 | 12.5 | - | 41 | 57 | - | 29 | 32 | - |
80 | 3 | 16 | 10.0 | 13.8 | - | 57 | 64 | - | 32 | 35 | - |
100 | 4 | 16 | 10.7 | - | - | 67 | - | - | 41 | - | - |
Note: 1) The dimensions listed in this table are the dimensions of the same parts of the socket welded pipe fittings, the pipe size and the socket hole diameter d1 and the flow hole diameter d2 specified by the standards, see page 46.
2) 3000, 6000, 9000 are pressure grade codes in pounds per square inch; sch80, sch160, XXS are wall thickness grade codes.
3) When 45° and 90° elbows have different diameters, the size of the flow aperture d2 is the size d2 that is the opposite of the smaller nominal diameter.
Socket welded pipe fittings(二)
GB/T 14383、HGJ10、SHJ410、ASME B16.11、JIS B2316
Socket welding pipe fittings
公称通径 Nominal diameter DN(in) | Depth of socket | 壁厚Wall thickness | The thickness of the pipe cap top | Installatoin length | 中心至承插孔底 Center to bottom of socket | |||||||||
45° Lateral tee | ||||||||||||||
Cmin | Kmin | Double coupling | Half coupling | A | H | |||||||||
A | B(in) | Jmin | 3000 Sch80 | 6000 Schl60 | 9000 XXS | 3000 Sch80 | 6000 Schl60 | 9000 XXS | E | F | 3000 Sch80 | 6000 Schl60 | 3000 Sch80 | 6000 Schl60 |
6 | 1/8 | 10 | 3.2 | 4.0 | - | 5.0 | 6.5 | - | 6 | 16 | - | - | - | - |
8 | 1/4 | 10 | 3.8 | 4.6 | - | 5.0 | 6.5 | - | 6 | 16 | 32 | - | 8 | - |
10 | 3/8 | 10 | 4.0 | 5.1 | - | 5.0 | 6.5 | . | 6 | 18 | 37 | . | 8 | - |
15 | 1/2 | 10 | 4.5 | 5.6 | 9.4 | 6.5 | 8.0 | 11.0 | 10 | 22 | 41 | 51 | 11 | 13 |
20 | 3/4 | 13 | 5.0 | 7.0 | 9.8 | 7.0 | 9.0 | 13.0 | 10 | 24 | 51 | 60 | 13 | 14 |
25 | 1 | 13 | 5.6 | 7.9 | 11.4 | 10.0 | 11.0 | 14.0 | 13 | 29 | 60 | 71 | 14 | 18 |
32 | 11/4 | 13 | 6.3 | 7.9 | 12.2 | 10.0 | 12.0 | 14.0 | 13 | 30 | 71 | 81 | 18 | 21 |
40 | 11/2 | 13 | 6.3 | 8.9 | 12.7 | 11.0 | 13.5 | 16.0 | 13 | 32 | 81 | 98 | 21 | 25 |
50 | 2 | 13 | 7.0 | 11.0 | 13.9 | 13.0 | 16.5 | 19.0 | 19 | 41 | 98 | 120 | 25 | 29 |
65 | 21/2 | 16 | 8.9 | 12.5 | . | 16.0 | 19.5 | - | - | 43 | - | - | - | - |
80 | 3 | 16 | 10.0 | 13.8 | - | 19.0 | 23.0 | - | 19 | 45 | - | . | . | - |
100 | 4 | 16 | 10.7 | - | . | 22.0 | 28.5 | - | 19 | 48 | - | - | - | - |
Note: 1) Wall thickness Cmin is the minimum value of wall thickness at any point. 2) The distance A from the center of the small diameter part of the reducing pipe to the bottom of the socket is the same as the large diameter part A. 3) According to the order requirements, the pipe fittings can also be processed in a combination of socket welding and threaded connections.