Socket welded pipe fittings(一)
GB/T 14383、HGJ10、SHJ410、ASME B16.11、JIS B2316
Socket welding pipe fittings
Nominal diameter DN(in) | Depth of socket | Wall thickness | Center to bottom of socket | ||||||||
A | |||||||||||
Cmin | 90°Elbow、Tee、Cross | 45°Elbow | |||||||||
A | B(in) | Jmin | 3000 Sch80 | 6000 Schl60 | 9000 XXS | 3000 Sch80 | 6000 Schl60 | 9000 XXS | 3000 Sch80 | 6000 Schl60 | 9000 XXS |
6 | 1/8 | 10 | 3.2 | 4.0 | - | 11 | 11 | - | 8 | 8 | - |
8 | 1/4 | 10 | 3.8 | 4.6 | - | 11 | 14 | - | 8 | 8 | - |
10 | 3/8 | 10 | 4.0 | 5.1 | - | 14 | 16 | - | 8 | 11 | - |
15 | 1/2 | 10 | 4.5 | 5.6 | 9.4 | 16 | 19 | 25 | 11 | 13 | 16 |
20 | 3/4 | 13 | 5.0 | 7.0 | 9.8 | 19 | 22 | 29 | 13 | 14 | 19 |
25 | 1 | 13 | 5.6 | 7.9 | 11.4 | 22 | 27 | 32 | 14 | 18 | 21 |
32 | 11/4 | 13 | 6.3 | 7.9 | 12.2 | 27 | 32 | 35 | 18 | 21 | 22 |
40 | 11/2 | 13 | 6.3 | 8.9 | 12.7 | 32 | 38 | 38 | 21 | 25 | 25 |
50 | 2 | 16 | 7.0 | 11.0 | 13.9 | 38 | 41 | 54 | 25 | 29 | 29 |
65 | 21/2 | 16 | 8.9 | 12.5 | - | 41 | 57 | - | 29 | 32 | - |
80 | 3 | 16 | 10.0 | 13.8 | - | 57 | 64 | - | 32 | 35 | - |
100 | 4 | 16 | 10.7 | - | - | 67 | - | - | 41 | - | - |
Note: 1) The dimensions listed in this table are the dimensions of the same parts of the socket welded pipe fittings, the pipe size and the socket hole diameter d1 and the flow hole diameter d2 specified by the standards, see page 46.
2) 3000, 6000, 9000 are pressure grade codes in pounds per square inch; sch80, sch160, XXS are wall thickness grade codes.
3) When 45° and 90° elbows have different diameters, the size of the flow aperture d2 is the size d2 that is the opposite of the smaller nominal diameter.
Socket welded pipe fittings(二)
GB/T 14383、HGJ10、SHJ410、ASME B16.11、JIS B2316
Socket welding pipe fittings
Nominal diameter DN(in) | Depth of socket | Wall thickness | The thickness of the pipe cap top | Installatoin length | Center to bottom of socket | |||||||||
45° Lateral tee | ||||||||||||||
Cmin | Kmin |
Double coupling | Half coupling | A | H | |||||||||
A | B(in) | Jmin | 3000 Sch80 | 6000 Schl60 | 9000 XXS | 3000 Sch80 | 6000 Schl60 | 9000 XXS | E | F | 3000 Sch80 | 6000 Schl60 | 3000 Sch80 | 6000 Schl60 |
6 | 1/8 | 10 | 3.2 | 4.0 | - | 5.0 | 6.5 | - | 6 | 16 | - | - | - | - |
8 | 1/4 | 10 | 3.8 | 4.6 | - | 5.0 | 6.5 | - | 6 | 16 | 32 | - | 8 | - |
10 | 3/8 | 10 | 4.0 | 5.1 | - | 5.0 | 6.5 | . | 6 | 18 | 37 | . | 8 | - |
15 | 1/2 | 10 | 4.5 | 5.6 | 9.4 | 6.5 | 8.0 | 11.0 | 10 | 22 | 41 | 51 | 11 | 13 |
20 | 3/4 | 13 | 5.0 | 7.0 | 9.8 | 7.0 | 9.0 | 13.0 | 10 | 24 | 51 | 60 | 13 | 14 |
25 | 1 | 13 | 5.6 | 7.9 | 11.4 | 10.0 | 11.0 | 14.0 | 13 | 29 | 60 | 71 | 14 | 18 |
32 | 11/4 | 13 | 6.3 | 7.9 | 12.2 | 10.0 | 12.0 | 14.0 | 13 | 30 | 71 | 81 | 18 | 21 |
40 | 11/2 | 13 | 6.3 | 8.9 | 12.7 | 11.0 | 13.5 | 16.0 | 13 | 32 | 81 | 98 | 21 | 25 |
50 | 2 | 13 | 7.0 | 11.0 | 13.9 | 13.0 | 16.5 | 19.0 | 19 | 41 | 98 | 120 | 25 | 29 |
65 | 21/2 | 16 | 8.9 | 12.5 | . | 16.0 | 19.5 | - | - | 43 | - | - | - | - |
80 | 3 | 16 | 10.0 | 13.8 | - | 19.0 | 23.0 | - | 19 | 45 | - | . | . | - |
100 | 4 | 16 | 10.7 | - | . | 22.0 | 28.5 | - | 19 | 48 | - | - | - | - |
Note:1)Wall thickness Cmin to a minimum wall thickness.2)Reducing pipe fittings of small diameter part of the center distance to the bottom bearing insert A part with large diameter is the same A.3)According to the requirements of the order,pipe fittings can also be processed into socket welding and threaded connection form of hybrid.